Tuxedo Fold Pop-up Card

This is a quick and easy card. Comes together very quick but looks like you spent hours on it. Below are the measurements and the full tutorial.

Cardstock 8 1/4x11 1/2 inches. Score on long side at 2 3/4, 5 1/2, 8 1/4 and 11.
Turn to short side and score at 2 3/4 just down to the score line past the 1/2" one.
Make a mark at 5 1/2 inches
Turn 160 degrees and make a mark at the 2 3/4 and score down to first score line at 5 1/2 inches.

Panels you glue inside are cut at 3/4x 3 3/4" and scored at 1/2" on each end.

Mats are 2 1/2"x5 1/4" come down on long side 2 1/2 inches and make a mark cut away from mark to opposite corner. creating a triangle. Do this to both pieces, making sure you cut the other side opposite so you can lay on each side.

Outside mats are the same as above and cut the same. Use the triangle you cut away for the lapels.

Swing Panel Card Easy Tutorial

We created this swing panel card using just a few pieces of paper and a die we have in the store. If you don't have this die you can still make the card with no problem. Below are all the measurements. Enjoy and let me know if you plan on making this.

YouTube tutorial: https://youtu.be/PM6KK_C8nkA

Cardstock: 8 1/5x5 1/2" On long side score in the middle at 4 1/4 inches.
Inside cardstock: 8x5 inches. on long side score at 1/2", 3", 5 1/2

Glue the piece with the 1/2" score line to the card base leaving the other panels unattached.

Mats are cut at 2 1/4x 4 3/4 inches

Front swing panel is cut at 3 3/8x3 3/8 inches. Then glue just the one side inside to the panel. Then glue the two 1/2" scored pieces just at the ends.  This panel should swing through the opening.

Hope you enjoy!

E

Mother's Day Card Dress

Center Stepper Card

Hello, today we are thinking out of the box and making our first center stepper card. This card came together very quick after I got all the measurements down pat. I hope you enjoy the tutorial and all the measurements are below.

Video tutorial: https://youtu.be/V8OKpCKZq-0 

Cardstock 7 1/2 x 8 1/2 inches. Put the card-stock in your trimmer with the 8 1/2" side at the top and on the 2" mark. Bring your knife blade down to the 2 1/8" mark and start cutting from there down to the 7 1/2" mark. Take the card-stock out of the trimmer flip it over and do the same to the other side. Making two exact cut lines on both sides.

Take this piece to your score board and start scoring just from cut line to cut line at the 2 1/8" mark (make sure you put the card-stock in where the 2 1/8" cut line is on the left side, where you need to start scoring.) Then score all the way across the card at the 4 1/4" mark. Score at 5 3/8" just from cut line to cut line, score at 6 1/2" from cut line to cut line. Score at 7 1/2" from cut line to cut line.

Take out of your score board and fold, making sure to fold the steps in the center as such, back, forward, back, forward.

Mats are cut at the following:

Sides: 2 @ 1 3/4x4 inches
           2 @ 1 1/2x3 3/4 inches

Bottom: 1@ 3/4x3 1/2inches
              1@ 1/2x3 1/4 inches

First step: 1 @ 1 1/4x3 1/2 inches
                 1 @ 1 x 3 1/4 inches

Second step: 1 @ 3 1/2x4 inches
                     1@ 3 1/4x 3 3/4 inches

That is it, all your measurements and now just to embellish. Have fun these are addictive.

Diamond Fold Card

To make this diamond fold card following the tutorial below. Also all the measurements are listed for your convenience. If you do make these please share on our Facebook page that link is below as well.

Cardstock/pattern paper 4x12 inches score at 2" and 10"

Mark at center and then bring sides up and fold over/down using a ruler to make the creasing easier. (as shown in the video)

Turn and do the same again. Fold in the sides forming your diamond in the center. Mat embellish any way you wish.

Video Tutorial: https://youtu.be/5KQ-Ll4GOSk

Facebook Group: https://www.facebook.com/groups/350219338419615/

Tim Holtz Travel Stamp Platform - Just IN!!

BoBunny Has Outdone Themselves - Once In A Lifetime - Summer Mood

Waterfall Explosion Box

Today we are working on a waterfall explosion box that is so simple you will wonder why you didn't make this a while ago. Great for gifts and we have Mothers day and Fathers Day coming up you know. Below are the measurements. If you make this project we would love to have you share it on our Facebook page this link is below.

Facebook Group: https://www.facebook.com/groups/350219338419615/

YouTube tutorial: https://www.youtube.com/watch?v=rQi_XTcHplw

Start with a 12x12 piece of cardstock score at 4, 8 and turn one turn and score at 4,8.

Mats for these pieces are 3 3/4x 3 3/4 inches you will need 4 for each side. So 8 total.

Waterfall pieces are cut at 3 1/2x4 score on the long side at 3 1/2 inches.

Mats for waterfall pieces are cut at 3 1/4x3 1/4 inches, you will need 8 of these.

Start the waterfall pieces 1/4" from top and sides of the flap. Then every 1/4" from there on down.

Top is a 6x6 piece of cardstock. Pull out from the edge of the score board a little bit maybe 1/16" of an inch and score at 1" all the way around.  Mat for top is cut at 3 3/4"x3 3/4" and the small mats for the sides is cut at 3/4"x3 3/4".

Cut up on the score lines at the edges to for the small flaps and wedge a small bit and you are finished.  Put glue on the flaps and you are finished.

Decorate as you wish.

Check Out What Is In Our April Kits - Join The Kit Club!

Beautiful Trinket Box

Below are the measurements for the trinket box. Click the video for the full tutorial.

You will need three pieces of cardstock 6x6 inches. You will score at 1" and 2" on all four sides. Do this to all three. Cut away the three outer squares in each corner and cut up on the last one also wedging. Glue the boxes together with the taps and then fold over the top parts reinforcing the boxes.

For the cover you will need a piece of cardstock cut at 5 5/8x6 7/8 put in your score board with the short side at the top and score at 2 1/4 and 3 1/4.

Designer paper to go in the bottom of boxes is cut at 1 7/8x1 7/8 inches

Reinforce panels is cut at 2"x6 1/2"
Mats for these pieces is cut at 1 7/8x6 3/8"

Attach one to the bottom of inside, one to top of inside.

Ribbon about 8 inches you will need 2 pcs. Glue one on the front in the center and the other on the back center, this will be used to tie the box together. Then cover the front and back with  your paper.

Attach boxes to the inside bottom leaving a small gab as show in the photo.

That is it really easy to make.

Beautiful Chalk Sign - Easy Tutorial - Chalk Couture

This is a brand new company I am now partnered with and I love the products. Check out the video and let me know in the comments what you think.

Order products: https://edithwray.chalkcouture.com/store#
Join my team: https://edithwray.chalkcouture.com/store#

New Products For April

We have lots of new products coming this month. The month of April is going to be fantastic for beautiful collections. Below are just a few of these beauties. 

Www.scrapbookingwithme.com